data brief for further information contact your local stmicroelectronics sales office. rev 1 september 2005 cd00066604 1/3 3 VS6750 2 megapixel smia camera module features 2 megapixel resolution sensor (1600 x 1200) smia 1.0 profile 2 compliant video data interface - ccp 2.0 command interface - cci 2.5 v/1.8 v operation on-board 10 bit adc small physical size integral emc shielding ultra low power standby mode on-chip pll on-chip por smooth frame rate control automatic dark level calibration description the VS6750 is a 2 megapixel camera module targeted at mobile applications. the camera module is smia 1.0 profile 2 compliant and is capable of generating raw bayer uxga images up to a maximum of 30 fps. the VS6750 supports the cci control and ccp 2.0 data interfaces. as different phone platforms have varying image processing capabilities and interfaces, it is possible that the system host may not handle the processing tasks required if connecting the VS6750 directly, or that the resulting frame rate performance may be too low. in such cases, a separate hardware accelerator (stv0984) device can be incorporated in the system to provide higher performances and/or a wider choice of interfaces. VS6750 offers an ultra low power consumption standby mode consuming less than 30 w. the VS6750 features allow straightforward integration into mobile phone designs: low emi video interface and package/socket shielding, low wire count (8 total), embedded power management(30 w power-down) and embedded pll. a minimal list of external components is required: supply decoupling capacitors, cci pull-ups and a charge-pump capacitor. the VS6750 3-element lens design ensures high quality image capture while maintaining low module height.the overall optical stack, including lens system, ir filter and sensor optical structures is developed within st. the VS6750 package uses the second generation of smop packaging technology. sensor and lens are assembled in a fully automated test and focus process for high volume and low cost production. this 2 megapixel sensor fits within the smia95 form factor (9.5 x 9.5 x 7.6 mm 3 ). applications mobile phone pda wireless security camera www.st.com
VS6750 2/3 cd00066604 figure 1. application diagram figure 2. block diagram figure 3. outline drawing extclk xshutdown ccp 2.0 2 megapixel VS6750 smia camera module cci stv0984 2 megapixel mobile imaging processor (optional) baseband or application processor smia scl sda extclk xshutdown clkp clkn datap datan vana agnd vdig dgnd vhigh 1152 x 864 y decoder 1608 x 1208 column adc x decoder line sram readout ccp 2.0 transmitter smia profile 2 frame formatter cci receiver sensor control registers pll and clock management power mgmt power-on reset pixel array VS6750 table 1. technical specifications module resolution 1600 x 1200 (uxga) physical pixel array 1608 x 1208 pixel size 3.0 m x 3.0 m sensor technology 0.18um hcmos8is exposure control +120 db analog gain +24 db (max.) dynamic range 60 db (typical) snr at 50 cd.m 2 33 db (typical) supply voltage 2v4 - 2v9 (analog supply) 1v7 - 1v9 (digital supply) power consumption <235 mw (@30 frame/s) <30 w (standby mode) lens 50 o hfov, f# 3.2 depth of field 70 cm -> infinity package type 16 pad smia95 tv distortion <|2%| relative illumination 50% system attach socket or flex table 2. temperature range storage -40 to +85c functional -30 to +70c normal operating -25 to +55 c optimal operating +5 to +30c test 23 2c table 3. order codes part number description VS6750s02f/t2 smop2 smia95 tape and reel
VS6750 cd00066604 3/3 revision history date revision changes 21-sept-2005 1 initial release. information furnished is believed to be accurate and reliable. however, stmicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result f rom its use. no license is granted by implication or otherwise under any patent or patent rights of stmicroelectronics. specifications menti oned in this publication are subject to change without notice. this publication supersedes and replaces all information previously supplied. stmicroelectronics products are not authorized for use as critical components in life support devices or systems without expres s written approval of stmicroelectronics. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners ? 2005 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
